- Free estimatesA firm price before any work starts
- Pressure matched to the surfaceHard surfaces blasted, siding soft washed
- Redo guaranteeSpot a missed area within 48 hours and we return at no charge
- Same-week schedulingMost jobs go on the calendar within the week
Pressure Washing Services for Local Homes
Pressure washing in Fishers, IN removes the algae, pollen film, tire marks and winter grime that a garden hose cannot lift. It is one of the fastest ways to improve how a home looks, and it protects concrete and siding from the slow damage that buildup causes. Call it power washing if you like, since homeowners use both names for the same kind of job.
What Every Visit Includes
We look over each surface first, then match the nozzle and pressure to what it can handle. Here is what a standard visit covers:
- A walk around the property to spot cracks, loose pavers and stained areas
- Pre-treatment of algae, mildew and oil before any rinsing
- Driveway, walkways and patio washed at the right pressure
- Siding and painted surfaces soft washed at low pressure
- Runoff directed away from flower beds, doors and window wells
- A walk-through at the end, so you can point out anything we missed
Pressure Washing vs. Power Washing
The two terms overlap, and most homeowners use them interchangeably. Fixr draws one line: power washing uses heated water, which helps cut through oil and grease on concrete. For driveways, Fixr lists pressure washing at $0.30 to $0.40 per square foot and power washing at $0.40 to $0.55. Fixr also says hot water is usually not recommended for siding. We decide which fits each surface when we see it, and your quote says which one we plan to use.
The Right Pressure for Each Surface
Using one setting for everything is how homes end up with etched concrete, gouged wood or water behind siding. Fixr's guide lists typical pressure ranges by material, shown below in PSI. We start at the low end of each range and work up only as far as the grime requires.
| Surface | Typical pressure (PSI) | Our method | What to watch for |
|---|---|---|---|
| Concrete driveway, walkway, patio | 3,000 to 3,500 | Higher pressure, pre-treated | Algae on shaded north sides, tire marks, oil spots |
| Stone | 2,500 to 3,000 | Lower pressure, wider fan tip | Soft stone can pit if pushed too hard |
| Brick | 500 to 1,500 | Gentle pass, careful around mortar | Loose mortar joints wash out |
| Asphalt | 1,000 to 1,500 | Low pressure, no hot water | Surface wears quickly if blasted |
| Wood deck or fence | 1,000 to 1,500 | Low pressure along the grain | Gouges and raised grain from too much force |
| Siding and stucco | Under 500 | Soft wash with a cleaning solution | High pressure drives water behind panels |
Source: Fixr, Cost to Pressure Wash a House, updated January 31, 2025. Ranges are general guidance. We adjust to the age and condition of each surface.
Skipping this step costs more than the wash itself. Etched concrete cannot be un-etched, and water forced behind vinyl siding can sit there and feed mildew from the inside. That is why the estimate visit matters: we look at the surface before we decide how hard to hit it.
Pressure Washing vs. Soft Washing
High pressure suits hard, non-porous surfaces such as concrete and stone, where the goal is to lift ground-in dirt. It is the wrong tool for siding, stucco or painted wood. Soft washing does the work with a cleaning solution and low pressure instead of force.
Fixr defines soft washing as any washing at less than 500 PSI. It prices soft washing a house at $0.25 to $0.35 per square foot, against $0.30 to $0.80 for pressure washing. Soft washing is the safer pick for anything on the house itself, and it treats mildew and algae instead of just blasting the surface.
The same low-pressure approach works for roof cleaning, available on request, to lift algae and moss streaks without the shingle damage a pressure washer would cause up there.
House Washing for Siding and Trim
House washing means cleaning the whole exterior of the home, usually with a soft wash. Fixr puts the national average at $700 for a 2,000 square foot vinyl-sided home, with most between $500 and $900, and it recommends washing your house about once a year. Siding on its own typically runs $300 to $600.
| Home size | Typical cost, labor included |
|---|---|
| 1,000 square feet | $300 to $800 |
| 1,500 square feet | $450 to $1,200 |
| 2,000 square feet | $600 to $1,600 |
| 2,500 square feet | $750 to $2,000 |
| 3,000 square feet | $900 to $2,400 |
Source: Fixr, Cost to Pressure Wash a House, updated January 31, 2025. Wide ranges reflect the amount of buildup and the siding material.
When Your Driveway or Siding Needs Washing
Buildup creeps in slowly, so most people notice it only when a neighbor's concrete looks better than theirs. These are the usual signs that it is time to book:
- Green or black patches on the driveway, usually on the shaded side first.
- A slick feel underfoot on a walkway or patio, even when it is dry. That is usually algae, not dirt.
- Dark streaks running down siding from the roofline or under window sills.
- Gray, faded siding that looks older than it is.
- Oil or rust spots where cars park or a grill sits.
- Yellow-green film across surfaces after pollen season.
- A listing or event ahead, when curb appeal counts.
- Sealing or staining planned, since sealer needs a clean surface to grip.
Why Buildup Comes Back So Fast
Concrete is porous. Moisture sits in it after every rain, and algae, mildew and pollen settle into those tiny pores where a broom cannot reach. Shade and damp make it worse, and so does water that pools where a driveway slopes toward the garage.
Left alone, algae turns a walkway into a slip hazard, and mildew on siding works into caulk lines and seams instead of staying on the surface. Washing early costs less than washing after several seasons of buildup, and it gives you a cleaner surface to protect.
What Pressure Washing Costs
Most homeowners want a number before they call, so here is where prices usually land. These figures come from Fixr's national guides, updated January 2025. Your own price depends on square footage, surface, and how much buildup has set in, and your free estimate gives you one firm number.
| Driveway size | Typical cost, labor included |
|---|---|
| 400 square feet | $120 to $160 |
| 600 square feet | $180 to $240 |
| 800 square feet | $240 to $320 |
| 1,000 square feet | $300 to $400 |
| 1,200 square feet | $360 to $480 |
Source: Fixr, Cost to Pressure Wash a Driveway, updated January 31, 2025. National averages, not a quote.
Other Areas Around the House
Many homeowners add a few extras while the equipment is out. Fixr's national price list for the exterior of a house shows these typical ranges:
- Patio: $50 to $75
- Porch: $100 to $150
- Deck or garage floor: $100 to $200
- Fence: $125 to $235
- Siding: $300 to $600
Bundling these into one visit is usually cheaper than booking each alone, because setup is the same.
What Drives Your Price
- Square footage. Most jobs are priced by the area cleaned, so a larger driveway costs more.
- Surface type. Fixr lists asphalt and composite higher per square foot than concrete or vinyl.
- Buildup. A driveway cleaned every year takes less time than one that has gone several seasons.
- Stories. Fixr's house guide shows two-story homes running higher than one-story, because of the added reach and setup.
- Stains. Oil, rust and old paint take extra pre-treatment and sometimes a second pass.
What a Good Quote Should List
Whoever you hire, ask for the quote in writing. A good one lists:
- Each surface being cleaned and its approximate square footage
- Whether each area gets pressure washing or soft washing
- Whether stain treatment is included or extra
- One total price, not a range
- The redo policy and when payment is due
How Your Free Pressure Washing Estimate Works
Getting a price is quick, and nothing starts until you agree to it.
- Tell us what you want cleaned. Call or use the form at the top of this page with the surfaces and a rough size.
- We confirm the details. We look at the surfaces, check for cracks, loose pavers and stains, and decide on pressure or soft washing.
- You get one firm price. A written number before any work starts, not a phone-guess range.
- We wash, then walk through. We rinse thoroughly, check the runoff areas and go over the finished surfaces with you.
A Year of Exterior Care Through Indiana Seasons
Wikipedia's climate table for Fishers lists a humid continental climate with a July average high of 85 °F, about 43 inches of precipitation and about 17 inches of snow a year. That cycle of damp summers and snowy winters decides when washing helps most.
Spring
Pollen coats everything in a yellow-green film, and winter leaves salt and grit on driveways and walks. A spring wash clears both before they work into the surface, and it gets the house ready for outdoor season.
Summer and Early Fall
Heat and humidity feed algae and mildew, especially on shaded concrete and north-facing siding. Storms splash mud onto lower siding. This is the best window for soft washing the house and for a second light driveway rinse.
Late Fall and Winter
Wet leaves left on concrete can stain it, so sweep them off early. Washing in freezing weather leaves ice behind, so we book winter jobs only on days warm enough for the water to drain and dry.
Pressure Washing Questions, Answered
How much does pressure washing in Fishers, IN cost?
Fixr's national guide puts most driveways at $180 to $240 for 600 square feet, and a whole house exterior at $500 to $900. Small jobs often carry a minimum charge near $100. Your free estimate gives you one firm number for your surfaces.
Will pressure washing damage my driveway or siding?
Not when the pressure and nozzle match the surface. That is why we soft wash siding and stucco instead of blasting them at driveway pressure. Concrete and stone handle higher pressure well, and we still start low and work up.
How often should I wash my driveway?
Fixr recommends at least once a year, and before each resealing. Homes with heavy tree cover or a lot of spring pollen sometimes benefit from a second light cleaning in late spring or summer.
What is soft washing, and do I need it?
Soft washing is a low-pressure clean with a cleaning solution, used on siding, stucco and painted surfaces. If you see dark streaks or green buildup on the house itself rather than the ground around it, soft washing is what you need.
Can you remove oil stains and rust?
Often, yes. We pre-treat with a detergent, then wash. Fixr notes that oil and heavy grime call for a stronger wash. Stains that have soaked in for years may fade rather than disappear, and we will tell you that upfront.
Should I seal my driveway after washing?
Sealing is optional. Fixr prices it at $0.88 to $2.10 per square foot and calls it not necessary but a way to add value. Cleaning has to come first, because sealer needs a clean, dry surface to grip. Tell us if you plan to seal, and we will time the wash around it.
Do I need to be home?
For outside work, usually not, as long as we can reach every surface and any gates are unlocked. We call or text before we arrive. Moving cars, patio furniture and planters off the area beforehand helps us finish faster.
How long does a visit take?
Fixr says a 600 square foot driveway takes about three hours. A driveway with a walkway and patio takes longer, and a whole house takes longer still. Your quote includes a time window.
Pair Your Pressure Washing With Other Exterior Work
Fixr's house washing guide lists window cleaning at $190 to $460 and gutter cleaning at $200 to $400 as common companions to a wash, and booking them together saves you a second appointment. Clean glass looks better against clean siding, and gutters cleared the same week keep fresh runoff from staining what we just washed.
Start with our window cleaning service for inside and outside glass, tracks and screens. If gutters are clogged, our gutter cleaning page explains what a visit covers and what it costs, and our window screen repair service handles torn or bent screens in the same trip.
Service Area
We provide pressure washing in Fishers, IN and across our regular route through Noblesville, Carmel, McCordsville, Westfield and the Castleton and Geist areas of Indianapolis. City limits are not a hard boundary, so if you live nearby and do not see your town listed, call and ask.